01Part drawing
Envelope, datums, weak zones, lift points and allowable distortion
Fixtures & Equipment
Fixtures, testing and process data must be designed together
For large, thin, complex and distortion-sensitive parts, support, lifting, transfer, flow and measurement jointly determine the outcome.
SYQ-2
Quenchant cooling-characteristic tester
Records temperature-time and cooling-rate curves under the selected probe and method for medium comparison, bath monitoring and technical communication.
Review test capability →
TCT
Internal multi-point temperature system
Synchronously records representative points through heating, soak and cooling to identify core-surface differences, actual cooling rates and transformation intervals.
Review system logic →
FIX
Custom quench fixtures
Designed from geometry, support points, handling and coolant paths for large, thin-wall, long, ring-shaped and complex parts.
Submit a drawing →
CUSTOM
Custom quench system and data integration
Integrates tank, relative motion, transfer, temperature measurement, records and alarms with the installed production line.
Submit equipment data →
Selection Boundary
Inputs for a custom fixture or system
02Loading
Batch size, placement, support, spacing and furnace circulation
03Transfer
Furnace-to-tank time, lifting route and safety limits
04Cooling system
Medium, tank, relative motion and heat exchanger
05Measurement
Probe, locations, sampling, report and traceability
06Acceptance
Dimensions, hardness, structure, cycle time and repeatability
FAQ
Technical questions
Answers are bounded by the material, workpiece, equipment and stated test conditions.
Should the fixture be designed separately from the quenchant and tank?
No. Support, loading, transfer, immersion attitude and cooling channels affect the flow and should be reviewed with the medium and installed tank.
Does a probe cooling curve reproduce the result inside a production workpiece?
No. A probe curve characterizes the stated test condition. Internal workpiece temperature, first-article inspection and production records are needed to validate the actual part.
Send the drawing, mass and current tank conditions for a fixture/equipment review
Send the material grade, dimensions/mass, target properties and current problem. We respond across quenchant, fixture, measurement and process layers.